# -*- coding: utf-8 -*-
# Copyright 2019 Red Hat
# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)

##############################################
#                 WARNING                    #
##############################################
#
# This file is auto generated by the resource
#   module builder playbook.
#
# Do not edit this file manually.
#
# Changes to this file will be over written
#   by the resource module builder.
#
# Changes should be made in the model used to
#   generate this file or in the resource module
#   builder template.
#
##############################################

"""
The module file for eos_l2_interfaces
"""

from __future__ import absolute_import, division, print_function


__metaclass__ = type


DOCUMENTATION = """
module: eos_l2_interfaces
short_description: L2 interfaces resource module
description: This module provides declarative management of Layer-2 interface on Arista
  EOS devices.
version_added: 1.0.0
author: Nathaniel Case (@qalthos)
notes:
- Tested against Arista EOS 4.24.6F
- This module works with connection C(network_cli). See the L(EOS Platform Options,../network/user_guide/platform_eos.html).
options:
  config:
    description: A dictionary of Layer-2 interface options
    type: list
    elements: dict
    suboptions:
      name:
        description:
        - Full name of interface, e.g. Ethernet1.
        type: str
        required: true
      access:
        description:
        - Switchport mode access command to configure the interface as a layer 2 access.
        type: dict
        suboptions:
          vlan:
            description:
            - Configure given VLAN in access port. It's used as the access VLAN ID.
            type: int
      trunk:
        description:
        - Switchport mode trunk command to configure the interface as a Layer 2 trunk.
        type: dict
        suboptions:
          native_vlan:
            description:
            - Native VLAN to be configured in trunk port. It is used as the trunk
              native VLAN ID.
            type: int
          trunk_allowed_vlans:
            description:
            - List of allowed VLANs in a given trunk port. These are the only VLANs
              that will be configured on the trunk.
            type: list
            elements: str
      mode:
        description:
        - Mode in which interface needs to be configured.
        - Access mode is not shown in interface facts, so idempotency will not be
          maintained for switchport mode access and every time the output will come
          as changed=True.
        type: str
        choices:
        - access
        - trunk
  running_config:
    description:
    - This option is used only with state I(parsed).
    - The value of this option should be the output received from the EOS device by
      executing the command B(show running-config | section ^interface).
    - The state I(parsed) reads the configuration from C(running_config) option and
      transforms it into Ansible structured data as per the resource module's argspec
      and the value is then returned in the I(parsed) key within the result.
    type: str
  state:
    choices:
    - merged
    - replaced
    - overridden
    - deleted
    - parsed
    - rendered
    - gathered
    default: merged
    description:
    - The state of the configuration after module completion
    type: str

"""

EXAMPLES = """

# Using merged

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport access vlan 20
# !
# interface Ethernet2
#    switchport trunk native vlan 20
#    switchport mode trunk
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

- name: Merge provided configuration with device configuration.
  arista.eos.eos_l2_interfaces:
    config:
    - name: Ethernet1
      mode: trunk
      trunk:
        native_vlan: 10
    - name: Ethernet2
      mode: access
      access:
        vlan: 30
    state: merged

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

# Using replaced

# Before state:
# -------------
#
# veos2#show running-config | s int
# interface Ethernet1
#    switchport access vlan 20
# !
# interface Ethernet2
#    switchport trunk native vlan 20
#    switchport mode trunk
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

- name: Replace device configuration of specified L2 interfaces with provided configuration.
  arista.eos.eos_l2_interfaces:
    config:
    - name: Ethernet1
      mode: trunk
      trunk:
        native_vlan: 20
        trunk_allowed_vlans: 5-10, 15
    state: replaced

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 20
#    switchport trunk allowed vlan 5-10,15
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport trunk native vlan 20
#    switchport mode trunk
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

# Using overridden

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport access vlan 20
# !
# interface Ethernet2
#    switchport trunk native vlan 20
#    switchport mode trunk
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

- name: Override device configuration of all L2 interfaces on device with provided
    configuration.
  arista.eos.eos_l2_interfaces:
    config:
    - name: Ethernet2
      mode: access
      access:
        vlan: 30
    state: overridden

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

# Using deleted

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport access vlan 20
# !
# interface Ethernet2
#    switchport trunk native vlan 20
#    switchport mode trunk
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config
# !

- name: Delete EOS L2 interfaces as in given arguments.
  arista.eos.eos_l2_interfaces:
    config:
    - name: Ethernet1
    - name: Ethernet2
    state: deleted

# After state:
# ------------
#
# veos#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
# !
# interface Management1
#    ip address dhcp
#    ipv6 address auto-config

# using rendered

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_l2_interfaces:
    config:
    - name: Ethernet1
      mode: trunk
      trunk:
        native_vlan: 10
    - name: Ethernet2
      mode: access
      access:
        vlan: 30
    state: merged

# Output :
# ------------
#
# - "interface Ethernet1"
# - "switchport trunk native vlan 10"
# - "switchport mode trunk"
# - "interface Ethernet2"
# - "switchport access vlan 30"
# - "interface Management1"
# - "ip address dhcp"
# - "ipv6 address auto-config"


# using parsed

# parsed.cfg

# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Use parsed to convert native configs to structured data
  arista.eos.l2_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Output:
#   parsed:
#      - name: Ethernet1
#        mode: trunk
#        trunk:
#          native_vlan: 10
#      - name: Ethernet2
#        mode: access
#        access:
#          vlan: 30


# Using gathered:
# Existing config on the device:
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Gather interfaces facts from the device
  arista.eos.l2_interfaces:
    state: gathered
# output:
#   gathered:
#      - name: Ethernet1
#        mode: trunk
#        trunk:
#          native_vlan: 10
#      - name: Ethernet2
#        mode: access
#        access:
#          vlan: 30

"""

RETURN = """
before:
  description: The configuration as structured data prior to module invocation.
  returned: always
  type: list
  sample: The configuration returned will always be in the same format of the parameters above.
after:
  description: The configuration as structured data after module completion.
  returned: when changed
  type: list
  sample: The configuration returned will always be in the same format of the parameters above.
commands:
  description: The set of commands pushed to the remote device.
  returned: always
  type: list
  sample: ['interface Ethernet2', 'switchport access vlan 20']
"""


from ansible.module_utils.basic import AnsibleModule

from ansible_collections.arista.eos.plugins.module_utils.network.eos.argspec.l2_interfaces.l2_interfaces import (
    L2_interfacesArgs,
)
from ansible_collections.arista.eos.plugins.module_utils.network.eos.config.l2_interfaces.l2_interfaces import (
    L2_interfaces,
)


def main():
    """
    Main entry point for module execution

    :returns: the result form module invocation
    """
    required_if = [
        ("state", "merged", ("config",)),
        ("state", "replaced", ("config",)),
        ("state", "overridden", ("config",)),
        ("state", "rendered", ("config",)),
        ("state", "parsed", ("running_config",)),
    ]
    mutually_exclusive = [("config", "running_config")]

    module = AnsibleModule(
        argument_spec=L2_interfacesArgs.argument_spec,
        required_if=required_if,
        supports_check_mode=True,
        mutually_exclusive=mutually_exclusive,
    )

    result = L2_interfaces(module).execute_module()
    module.exit_json(**result)


if __name__ == "__main__":
    main()